close

arduino uno

KnowledgeBase

Arduino Starter’s Guide (1/7): Blinking LED

videotogif_2018.05.28_15.46.54
LEDs (Light Emitting Diodes) are used in all clever things,so we have included them in this kit. We start with something very simple by repeatedly switching on and off and creating a pleasant flashing effect. To get started, grab the parts listed below, pin the layout sheet to your breadboard and then plug everything in. Hardware Used: 1 - 100 ohms Resistor 1 - LED 1 - Arduino Uno You can buy all this Hardware at Createlabz. Software Used: Arduino IDE Set-up the Hardware:

Warning: Cannot assign an empty string to a string offset in /home/createl1/public_html/community/wp-includes/class.wp-scripts.php on line 454

Warning: Cannot assign an empty string to a string offset in /home/createl1/public_html/community/wp-includes/class.wp-scripts.php on line 454