April 2018 - CreateLabz

31381156_2052107128136008_8604490030007713792_n

Wireless Lamp Control using SIM800C GSM Module, Arduino Uno and DC Relay Module

by Mikko Bryant Alinsub on April 30, 2018

Overview GSM, or Global System for Mobile Communications, is the most popular cell phone standard in the world. This system operates in almost 200 countries. It is considered as the default global standard. In this project, the SIM800C is used to control the state of the lamp. The SIM800L is a cheap and compact GSM module. This module can perform

KnowledgeBase

Humidity and Temperature Sensing using DHT11 and 20×4 LCD Display on Arduino UNO

by Eddyson Canoy on April 27, 2018

Overview This mini-project covers the functionality of a DHT11 humidity and temperature sensor module. It is an accurate and inexpensive sensor that has an ADC to convert analog values of humidity and temperature. The 8-bit microcontroller in the sensor is used for data conversion. It provides reliable output results when the

KnowledgeBase

(2/2) Switching LEDs using Proximity Sensor APDS-9960 module

by Paul Niko Bautista on April 27, 2018

Overview Continuing our investigation about the APDS-9960 module, the integrated proximity sensor can sense distances up to a few centimeters (~6 centimeters). In this simple project, 4 LEDs will be turned on via distance thresholds. Hardware Used Robotdyn Uno R3 Breadboard Male to Female Jumper Wires 4 330kOhms Resistors AP05-9960

KnowledgeBase

(1/2) Switching LEDs using Gesture Sensor AP05-9960 module

by Paul Niko Bautista on April 25, 2018

Overview A Gesture Sensor AP05-9960 module is a nifty device that has 4 integrated sensors : RGB, Ambient Light, Proximity ,and Gesture. For this first mini-project, 4 LEDs will be switched on via SWIPE UP, DOWN, LEFT, RIGHT gestures. Hardware Used Robotdyn Uno R3 Gesture Sensor AP05-9960 module Breadboard Male

KnowledgeBase

Mini tachometer (RPM meter) using Optocoupler Sensor and Motor Shield L293D

by Kevin Montenegro on April 24, 2018

Overview: How important is it to know the speed of a car or moving object? Is it really necessary to know the velocity of a moving object? In this tutorial we will see how to connect and use an Optocoupler sensor - photo interrupter module by powering the Motor by Motor

KnowledgeBase

Optical Fingerprint Sensor with Arduino

by Paul Niko Bautista on April 23, 2018

Overview Fingerprint Sensor is an alternative device for security and verification purposes. In modern technology, it is included in high-end smartphones as an alternative unlock against pass codes or pattern swipes. One application of the fingerprint sensor is that of an attendance monitoring system, which is widely used in offices. We are going to create a system which will greet

Older Posts

Warning: Cannot assign an empty string to a string offset in /home/createl1/public_html/community/wp-includes/class.wp-scripts.php on line 454

Warning: Cannot assign an empty string to a string offset in /home/createl1/public_html/community/wp-includes/class.wp-scripts.php on line 454